Test certificates for electricians

Pro Pro is active in this browser. Open your Pro accountPro free trial is active. Open your Pro accountPro is active but will not renew. Open your Pro account

Sources

Last updated 2026-10-27

This page says what the limits, intervals and certificate wording on WiringCert rest on, and how far each source was checked. Regulation numbers are cited by number only; no standard text or table is copied and no IET form is reproduced. The results are checks and estimates for a qualified person to review, not an approval by any scheme body. If a source changes or a link breaks, write to support@wiringcert.com.

Texts we read

We opened these texts on 2026-10-27 and compared them with the rule they back (the regulation noted in the link text, not the whole document):

Bibliographic references, not checked against the printed text

BS 7671:2018+A4:2026 and IET Guidance Note 3 are sold publications. We link the publisher, cite regulation numbers, and derive the limits from formulas and product-standard facts (for example the maximum Zs from 0.95 × 230 V divided by the tripping current). Until the printed text is checked, every such result on the site is marked “rule review pending”. The product standards for RCDs and the conductor standard for resistance are listed for the same reason.

Official guidance, opened but not read in full

German pages (DGUV, VDE) list their sources on the German sources page.

Last checked: 2026-10-27.